Swallow Ring
Swallow Ring
One of the most famous American Traditional tattoo pieces representing the returning home of sailors much like the migration patterns of swallows.
This detailed piece is adjustable and can be worn on any desired finger.
Materials
Materials
All of our pieces are handcrafted from 925 Sterling Silver.
Shipping & Returns
Shipping & Returns
AU & NZ - 1-2 business days
EU - 6-10 business days
USA - 6-10 business days
Please refer to the Returns & Exchange page for info on returns.
Care Instructions
Care Instructions
All of our jewellery pieces are handcrafted from 925 Sterling Silver. Simply put - they are made from 92.5% pure silver and 7.5% from other alloys to maintain its structure. This means no green staining or skin irritation! With a tad bit of love and care for your fave pieces, they will continue to shine and stand the test of time.
- Regularly wipe the jewellery with the provided polishing cloth.
- Take off the jewellery when showering, swimming or applying skin/hair products.
- Store the jewellery in the provided pouch in a cool, dry place out of the sun.
Sizing Guide
Sizing Guide
We understand the frustration in ordering something online, hyping up its arrival and then having it not fit quite how you anticipated. Thus, we aim to make the sizing procedure hassle and mistake free - meaning your first ZONDER order will fulfil the hype and be the perfect fit.
All of ZONDER's ring sizes are in US sizing. Please note: visiting a local jeweller will always be your best bet for the most accurate sizing.
If you have access to a printer:
- Ring-click the image above and select 'Save Image As'
- Print the image at 100% scale (ensuring scaling is switched off)
- Measure the bottom box section - it should be 3.5 inches or 8.9cm from end to end.
- Cut out the sizing tool (top section) and wrap the piece of paper around the desired finger.
- The number that aligns with the 'Read Size Here' line will be your US size. (Note: if you are between two sizes; it is best to round up a size, rather than round down.)
If you do not have access to a printer:
- Cut a thin strip of paper, about 10-12cm long
- Wrap the strip of paper around the base of the desired finger
- Using a pen or pencil, mark the point at which the paper overlaps itself
- Lay the strip of paper on a flat surface and a use a ruler to measure (in millimetres) the distance from the end of the strip to the marking you made. This will give you the circumference of your finger
- Using the chart below, convert your measurement to the standard US ring size
- If you are in between sizes, it is always best to round up rather than down
Measuring Tips
- Allow enough room to accomodate for your knuckle
- Bear in mind that the same finger on the opposite hand may have different measurements
- Make sure your body is at a normal temperature as this can affect the measurement
Length (mm) | 44 | 47 | 49 | 52 | 55 | 57 | 60 | 62 | 65 | 67 |
---|---|---|---|---|---|---|---|---|---|---|
Ring Size (US) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Ring Size (UK & AUS) | F | H | J½ | L½ | N½ | P½ | R½ | T½ | V½ | X½ |
Ring Size (EUR) | 44.2 | 46.8 | 49.3 | 51.9 | 54.4 | 57.0 | 59.5 | 62.1 | 64.6 | 67.2 |
Ring Size (East Asia) | 4 | 7 | 9 | 11 | 14 | 16 | 18 | 20 | 23 | 25 |